Post Hole Digger Gas Powered, 52cc 2.4 HP 2 Stroke Engine Earth Auger with 8" Drill Bit, EPA Compliant Post Hole Auger

• Power parameters - 52cc 2.4 HP 55.49 ft-lb max torque gas engine. 260RPM max earth auger bit speed and 7500RPM max engine speed.
• Auger Drill Bit - 3/4" standard shaft size. 30" length� 8" diameter high strength manganese steel auger bit rips and shreds soils.
• Fuel - Powered by 25: 1 mixing ratio gasoline and oil. 40.58 fl.oz translucent fuel tank. empty mixing bottle is included. Gear oil has been added in advance. Gear oil lubrication needs to be added after 25 working hours.
• Multipurpose - The auger digs and bores through holes for decks. fence posts. tree planting. signs. landscaping and soil sampling.
• Maneuverability - One-person post hole digger features anti-vibration and anti-slip grip handles. Do not use the auger on a slope steeper than 15掳.
• Warranty - Amazon does not handle the return of gasoline-related products. If you have any questions or concerns. please contact us directly via Amazon email or our official website. Our support team is standing by to assist you.

�

�

25: 1 gasoline and oil mixing ratio.

30" length� 8" diameter Drill Bit

Earth auger bit could speed up to a maximum of 259.6 RPM.

Dig and bore through holes for decks. fence posts. tree planting. signs. landscaping and soil sampling.

Anti-kickback system provides added safety

Do not use the auger on a slope steeper than 15掳.

Standard auger bit with shaft size of 3/4 in.

40.58 fl.oz translucent fuel tank.

BILT HARD Post Hole Digger 52cc

Hand pull starter

�� Toggle the choke lever upwards fully to make the choker closed. Put the switch into position START.

�� Press the fuel primer bulb 8 times.

�� Pull the starter 3 times.

�� Toggle the choker lever downwards fully to keep the choke open.

�� Pull the starter until engine starting.

�� Let the engine run in idle speed for 2-3 Minutes.

�

�

�

�

�